1.Wireless, 3 AAA battery powered operation means no installation hassles.You can install batteries into the unit, mount the light where you need it, and enjoy the safety and security.
2.Perfect for any location,this sensor motion light can be used to light up your hallways, stairs, bathrooms, bedrooms, closets, steps,kitchen, storage areas and so much more.
Sensoring Distance: 10ft
Sensor Time: 15 seconds
Power Source:3 x AAA Battery powered (Not included)
Light Color: Cool White
LED Lifespan:50,000 hrs or more
Product Size: 3.2 x 0.7 inch
3 x Motion Sensor LED Night Light
3 x 3M adhesive on the backside
1 x User Manual
1.Please make sure that the batteries have been installed correctly. The light will not work or even be destroied, if the anode and cathode of battery are connected with the wrong direction.
2. when you change the battery, do not pull the plastic directly. Otherwise the plastic that holds the light in part will break off. You should Hold the plastic part and Rotate it in a clockwise direction, then open it and install battery,then close it.
3.Once stick it to ONE PLACE; you had better not remove to another place. Otherwise it will lose the stickiness and break off the plastic cover.
4.If you use Alkaline battery first and then change to zinc-manganese dry battery, the lights might not work as the zinc-manganese dry battery is shorter than the Alkaline battery.
5.The sensor light might not work if you use the infrared heater in winter. The infrared will cause failure of the sensor. However, the light will get back to work in 30 minutes after turning off the heater.
🎍【Super Bright 6 LEDs】6 pcs super bright SMD 2835 LED,up to 20 Lumen output, brighter enough to make sure you and your family never stumble in the dark.
🎊【PIR Motion & Light Sensor 】Ms Kelly motion sensor light is auto-on within 10 feet, and auto-off after 15 seconds of no motion detected. This can help prolong battery life. It will turn on only when it is dark and when motion is detected.
🎍【Battery Operated】Powered by 3PCS AAA batteries (not included) per motion sensor for coreless installation. It’s easy to twist the back cover of little lights and install the batteries, which is low consumption and can save much energy.
🎊【Easy Installation】The step lights is easy to install and no wiring required. The wall light is sent with 3M adhesive pads and built-in magnet, peel and easy to stick anywhere. No tools, screws or nuts required.
🎍【Note & Attention】 This light can only be turned on in darkness environment. And the light of one may cause the other, so please DO NOT install 2 lights too close, otherwise, they will DOES NOT WORK! And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!