The LT- 870 Wireless transceiver can transmit and receive DMX signal. If you are transmitting to low voltage LED Strip or LED modules you can use the LT-870 together with the LT-874 Wireless DMX Decoder ( see below)
LT-870 Wireless DMX512 transceiver transfers the standard DMX512 protocol data by wireless transmission. One send, one receive or multiple receive. (Supporting point to point, point to multi-point), a sending end can configure multiple receiving ends as long as the receiving end and sending end are set as same frequency point.
The product is used for DMX console and lamp. The wireless data transmission between lamps replaces cable transmission which relies on twisted-pair, etc., for a long time. No delay and data is real-time and reliable during data transmission process,
The product adopts 2.4GHZ RF global open ISM frequency channel, which is a low-cost, powerful wireless DMX512 transceiver and widely applied to DMX512 controllers from various manufacturers.
64 channels choices, users can use 64 groups wireless network independently without interference in one place.
Use relay Settings if need further increase the communication distance.
Note: This product also can be applied to the RS485 bus equipment where wiring is not convenient to wireless transmit RS485 signal.
● Adopt 2.4GHZ RF global open ISM frequency channel, which is applicable for license free worldwide and efficient GFSK modulation. .
● Compatible with Standard International standard DMX512 protocol.
● A sending end can configure multiple receiving ends. As long as the receiving end and sending end are set as same frequency point, both sides can communicate normally.
● 64 channels choices, users can use 64 groups wireless network independently without interference in one place.
● 4 choices of sending end transmitted power level, visual communica